Water Jet Pump H450 Intensifier Pump Industrial Water Jet Cutter

Water Jet Pump H450 Intensifier Pump Industrial Water Jet Cutter
Water Jet Pump H450 Intensifier Pump Industrial Water Jet Cutter
  • Water Jet Pump H450 Intensifier Pump Industrial Water Jet Cutter
  • Water Jet Pump H450 Intensifier Pump Industrial Water Jet Cutter
  • Water Jet Pump H450 Intensifier Pump Industrial Water Jet Cutter
  • Water Jet Pump H450 Intensifier Pump Industrial Water Jet Cutter

Water Jet Pump H450 Intensifier Pump Industrial Water Jet Cutter


  H450 jetting machine pump is our hot-selling product. It was produced in 2008 and used until now. It is updating with the latest technology all the time.
  As an important point of the water jet and the origin of the high-pressure water, the water jet cutter pump plays a very important part. That is the reason we insist using the configurations with the famous brands to install, including the SIEMENS motor, ABB AC contactor, MITSUBISHI PLC, and ACCUSTREAM parts, to better ensure the stability and efficiency of the water cutter’s running.



Product Details
Parameter
Ultra-Waterjet Pump
 

 
Series H450 Waterjet Pump
Dimension 1.8*1.4*1.3m
Max
Pressure
450mpa 
Working
Pressure
340-360mpa 
Max
Thickness
0-120mm
Max
Water Flow
3.7L/min
Motor SIEMENS
37kw/50hp
Oil Capacity 120L
Oil Pump
Output Volume
100L/min
Oil Pump
Pressure
31.5mpa
Oil Pressure
Ratio
1:20
Warranty 1 Year
Delivery Time 45 Days
After-sales
Service
Field Installation
Online Service
Loading Container LCL

  The structure is very strong. The inner side is welded by steel plate, outside is installed by the sheet plate. Concise but not simple.
  Micro-computer with the touching screen, owns the comprehensive safety protective device, such as the detection of the pressure, protection of the over-temperature, alarm of the overload, etc. It would stop and give the alarm when it meets the problem, then you can clearly see the problem’s reason from the touching screen and adjust the machine according to the relevant tips.
  37kw / 50hp SIEMENS motor has the feature of stability and high efficiency. It can better help you cut thicker and harder materials, like granite, quartz, steel plate, stainless steel plate, etc. We also make a protective cover for the position of the motor’s coupling, to prevent the tools from falling down and make the motor is broken, and surely the safety performance would be better.
  With the American parts, then we assemble in the intensifier which is called the heart of the industrial water jet cutter pump. It can provide more stable pressure for the waterjet cutting machine.
  The design of the circuit board is very concise and the ABB AC contactor, MITSUBISHI PLC, other switches are ranked step by step, there is no disturbance from each other.
  The pump is equipped with wind cooling by the fan. We adjust the cooling temperature would be 25°. When the temperature is higher than 25°, the fan would auto work and help your machine decrease the temperature.
  There is no high requirement to the cutting water for the water jet. The water with TDS 100-300 that is no problem. At the same time, we equip one set of the water filter inside the pump and help you improve the water’s quality, also effectively improve the service life of the spare parts.



 
industrial-water-jet-cutter
Max Pressure 450mpa / 65000psi
 
Working Pressure 360-380mpa / 52200-55000psi
 
Max Water Discharge 5.0L / min
 
Motor Power 37kw /50hp
 
Max Thickness Steel Plate (CS, MS) 200mm
SS Plate 160mm
Aluminum Plate 260mm
Granite 260mm
Marble 280mm