
Double Cooling Waterjet Cutting Machine
Double Cooling Waterjet Cutting Machine
Double cooling devices are mainly produced for the Middle East Countries' customers.
Air-conditioner chiller is to cool down the running water, our suggestion is to put a water tube under the ground for about 3 meters. Then the water would go inside the water chiller and have a secondary cooling. Normally, we set the cooling temperature to 30°. After cooling according to the water chiller, the water would go into the waterjet pump. The water would become high-pressure water and go to the waterjet cutting head.
The chiller would stop working if the water temperature is lower than 30°.
The oil chiller would cool down the hydraulic oil. The working principle of the waterjet pump is to use hydraulic oil to push the piston, the piston would pushes the water, they do an action of "left and right". After squeezing, the water's pressure would be higher and higher. The temperature of the working oil would be very high, it needs a very good cooling device to cool down. An oil chiller can play a very important role in it, it can decrease the oil's temperature in a short time, and better protect the spares of the waterjet pump.
Double cooling can make the waterjet pump's spares more durable, better improve the customers' working efficiency.