The waterjet cnc cutting machine was made loading successfully
Thanks for the joint effort of each employees, the first waterjet cnc cutting machine of latest AC-5axis was tested successfully and made loading. This success is no easy to get it.
Due to the reason of force majeure, it is too late for many companies to recover the business. After starting the business again, Shuttle met three difficulties immediately: many workers are still at hometown and can not return to the company in time; many suppliers didn’t open; customers are urgent for the machines’ delivery time. Even though there are parts of workers are at the company, but their working efficiency is low.
How to get out from this poor situation, it is a very important problem for Shuttle.
At that time, general manager, Lee had meetings with workers from time to time. On one hand, he shared his experience in how to do the person clean job and protect myself. On the other hand, the most important, now this situation is temporary. He encouraged everyone must try the best and get through this challenge.
Gradually, things got better. More and more workers came back from their hometown and joined the normal production. Supplier started to open and provide the spare parts to us. Customers agreed to delay the delivery time of the machine.
Installation of machine table is finished!
Installation of intensifier pump is finished!
Adjustment of cutting head is finished!
Do the high-pressure water test!
Test is finished!
Flatbed truck was coming from entrance slowly, workers use the crane to take the machine on the truck.
After the truck leave, everyone went back their position and continued to work.
They are busy in the production of second AC-5axis waterjet cnc cutting machine.
Due to the reason of force majeure, it is too late for many companies to recover the business. After starting the business again, Shuttle met three difficulties immediately: many workers are still at hometown and can not return to the company in time; many suppliers didn’t open; customers are urgent for the machines’ delivery time. Even though there are parts of workers are at the company, but their working efficiency is low.
How to get out from this poor situation, it is a very important problem for Shuttle.
At that time, general manager, Lee had meetings with workers from time to time. On one hand, he shared his experience in how to do the person clean job and protect myself. On the other hand, the most important, now this situation is temporary. He encouraged everyone must try the best and get through this challenge.
Gradually, things got better. More and more workers came back from their hometown and joined the normal production. Supplier started to open and provide the spare parts to us. Customers agreed to delay the delivery time of the machine.
Installation of machine table is finished!
Installation of intensifier pump is finished!
Adjustment of cutting head is finished!
Do the high-pressure water test!
Test is finished!
Flatbed truck was coming from entrance slowly, workers use the crane to take the machine on the truck.
After the truck leave, everyone went back their position and continued to work.
They are busy in the production of second AC-5axis waterjet cnc cutting machine.
